Place the light where it supports the task.
Letters, lightboxes, contours and branded surfaces.

Plan graphic high visibility around the physical detail, operating conditions and maintenance path.
Letters, lightboxes, contours and branded surfaces.
Form, depth, diffusion, color, wiring, environment and service.
Start with light appearance and physical fit, then confirm the exact configuration.
Treat each connected component as part of one application brief.


Use the full planning guide for dimensioned sections, sightline review and mockup decisions.
Send dimensioned drawings of the completed sign: front view, return detail, a section through the illuminated area, the mounting surface and the access point. Mark which surfaces emit light, the sign type (face-lit, halo-lit, edge-lit, internally lit or exposed contour), materials and the indoor or outdoor exposure.
No. An IP rating on the light source does not establish that the completed sign has the same protection. Review every boundary separately, including cut ends, connectors, cable entries, seams, drainage, driver enclosures and mounting penetrations.
Uniformity comes from the complete optical geometry: depth, source spacing and aiming, face transmission, diffuser, internal reflectance and structural shadows. Do not copy a spacing value from another sign; evaluate a representative sample with the intended face material and depth, including the smallest letter or tightest curve.
Yes. LED neon flex and LED strips are listed in the product catalog. Voltage, color temperature, length and packaging can be customized, and custom production takes 15–20 days once the requirement is confirmed. Bend direction, minimum radius and cut conditions must be verified from the exact model documentation.
Samples are bought at the normal product price. Stock samples ship in 2–3 days and ULANTU pays the sample shipping cost.
Full planning steps: Signage LED lighting specification checklist.