Start an inquiry
PRODUCT COLLECTION

Waterproof LED Strip

Browse 15 real catalog products and open each product to review its available configurations.

ULANTU catalog product

15 products

All products
SELECTION GUIDE

Shortlist a Waterproof LED Strip by System Requirements

Choose a waterproof LED strip by matching exposure, supply architecture, light format, run plan and connections to an exact configuration. Do not select outdoor LED strip lights by an IP number alone: strip construction, cut ends, joints, controls and power equipment are separate system parts.

ModelSupply and constructionAvailable choicesInformation to provide
ULT-96BD9A5B — 24V Solid-Silicone COB LED Strip24V COB strip with a solid silicone cover and adhesive backing.Warm white, neutral white or white strip formats; protected power supplies and a solderless connector are separate selectable configurations, not automatic inclusions.Required light color, supplied length, feed layout, connection method and whether a separate power-supply or connector configuration is required.
ULT-B588F161 — 24V 2835 Solid-Encapsulated LED Strip24V 2835 strip, 120 LEDs/m, with source-listed IP68 solid-encapsulated strip construction.Three white tones and six fixed-color choices are listed as separate configurations.Exact color, required supplied length, planned feed points, sealed-connection layout and fixing method.
ULT-1E5B33A3 — 220V IP67 Silicone-Encapsulated COB Strip Sets220V COB strip set with silicone encapsulation and source-listed IP67 strip protection.3000K, 4000K or 6000K; 1–100 m listed set lengths; EU round-pin or China-standard two-flat-pin plug; with or without an inline switch.Exact color, length, plug format, switch choice, destination market and installation conditions.

Use these models as a shortlist, then verify the exact SKU and exposed interfaces.

15 products · Page 1 of 2

PROJECT BRIEF

Prepare a Waterproof LED Strip RFQ

A useful quotation request defines the environment and system boundary before asking for price. Send these inputs so the supplier can compare the correct configuration.

Exposure and installation
State indoor or outdoor use, sheltered or directly exposed position, likely water contact, mounting orientation, drainage conditions and access for sealing and service.
Product and configuration
Provide the selected product URL or model, exact SKU if known, light color, control requirement and any plug, switch, connector or power-supply choice.
Quantity and run plan
List each run length, number of runs, total quantity, cut or connection locations and planned feed points.
Supply and destination
State the system voltage, available power arrangement, destination country or market and any site constraints the supplier must review.
Sample review
Explain which construction, color, connection and installation conditions the sample must represent before the project quantity is approved.

Include drawings or dimensions through the available project discussion after the initial request when they are needed to explain joints, feeds or exposed interfaces.

Submit a Waterproof LED Strip Brief
FAQ

Waterproof LED Strip questions.

Which IP rating should I choose for a waterproof LED strip?

There is no single IP code for every location. An IP code is not a general quality score; confirm the exact model and configuration covered by the rating, the test evidence, whether it still applies after cutting or joining, and the mounting orientation and exposure. Each product page lists its available configurations.

Does a waterproof LED strip make the whole installation waterproof?

No. Water can reach cut ends, joints, connectors, cable glands, controller boxes, drivers and mounting penetrations. Each interface needs its own documented protection, and the layout should avoid places where water can collect.

Can waterproof LED strips be customized?

Voltage, color temperature, length and packaging can be customized, and your logo can be printed on the LED strip and on the packaging. Custom production takes 15–20 days once the requirement is confirmed.

Is there a minimum order quantity and how fast do stock items ship?

There is no minimum order quantity on stock items, and stock orders ship in 2–3 days. Custom production takes 15–20 days once the requirement is confirmed.

Can I order a sample?

Samples are bought at the normal product price. Stock samples ship in 2–3 days and ULANTU pays the sample shipping cost.

Full guide: Outdoor LED strip IP rating guide.